You save 15% (-€14.19)
Shop now. Pay later.
The Unior 1690/1 Alignment Gauges Wheel is a must-have tool for any cyclist who wants to ensure their wheels are perfectly aligned. Made from mild steel, stainless steel, and PE-polyethylene, these gauges are designed to allow easy calibration of wheels with dimensions from 16 to 29 inches, with or without tires.
The gauges are specifically designed to check the symmetry of the axis between the hub and the wheel rim. To use them, you first establish a suitable distance between the sliders according to the size of the wheel. You then lean the center support against the axis of the bike and place the frame with sliders closer to the rim so that the sliders touch the rim. Then you fix the rest with a screw and check the other side of the wheel.
This allows you to see if the bike is centered on the rim. If the wheel is not centered, it needs to be adjusted. With a minimum caliber measurement of 320 mm and a maximum caliber measurement of 660 mm, these gauges are suitable for a wide range of wheels. They are also lightweight, with a length of 667mm and a weight of just 850g.
Overall, the Unior 1690/1 Alignment Gauges Wheel is an essential tool for any cyclist who wants to ensure their wheels are perfectly aligned and performing at their best.
Write your review. Be the first to rate this product