Spray.bike Smoothing Putty

€10.95
5 Reviews
96% of 100

Product out of stock

Enter your e-mail and we will let you know when it is available.

Details Spray.bike Smoothing Putty

Shipping limitations: Due to transport restrictions, we are unable to send Spray.Bike products to countries outside the European Union, or to Norway, Switzerland, Malta, or Iceland.

  • 400ml.
  • Thick cover-all putty for tatty frames.
  • Cover minor blemishes including scratches, rust damage and stickers.
  • Easily sanded down.

Instructions for use:

  • Ensure surface is clean and dry.
  • Wear protective gloves, protective clothing, eye/face protection.
  • Always paint in an open space in the open air.
  • Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%.
  • Shake can for at least 3 minutes before use.
  • Test spray for 2-3 seconds prior to application.
  • Spray surface from a distance at least 20 cm.
  • When spraying, keep hand moving at all times.
  • Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours).
  • At end, turn can upside down and spray for 2 seconds before storing.
  • Protect can from sunlight and temperatures exceeding 50°C/122°F.

Description

The Spray.bike Smoothing Putty is a 400ml thick cover-all putty designed specifically for tatty frames. It is perfect for covering minor blemishes including scratches, rust damage, and stickers. The putty can also be easily sanded down for a smooth finish.

Before using the product, it is essential to ensure that the surface is clean and dry, and the optimal temperature for spraying is 20-25°C. It is also important to wear protective gloves and clothing, eye/face protection and to always paint in an open space in the open air.

The product comes with comprehensive instructions for use which include shaking the can for at least 3 minutes before use and testing the spray for 2-3 seconds prior to application. One should allow the surface to dry before adding a second coat, with touch dry time of 10 minutes, and complete cure time of 2 hours.

It is important to note that due to transport restrictions, the Spray.Bike products can only be shipped within the European Union, and shipping to Norway, Switzerland, Malta, or Iceland is not possible. Also, it is imperative to protect the can from sunlight and temperatures exceeding 50°C/122°F.

About Spray.Bike

Spray.Bike is a collaboration between three different companies: Brick Lane Bikes – a major international manufacturer, retailer and wholesaler in the bike industry, based in London. Vicious Cycles Athens – an urban bike workshop in the centre of Athens, Greece. Cosmos Lac – a high-tech paint manufacturer based in Greece.

Spray.Bike was created out of frustration with existing products. if you’re not an experienced pro, metal or car spray paint is so utterly difficult to use on bikes. At VCA, while trying to repair a damaged frame using a standard RAL spray, we were so disappointed with the results that we phoned up the manufacturer, which happened to be Cosmos Lac. “Well what do you want the paint to do?” was the reply. After 2 years of development, Spray.Bike is the answer.

VCA and Cosmos Lac sent samples over to Brick Lane Bikes in London for their highly trusted opinion. From the moment they tried it, they wanted to be part of the excitement too.

Reviews Spray.bike Smoothing Putty

4.8/5

96%

5 review(s)

5 Stars

4

4 Stars

1

3 Stars

0

2 Stars

0

1 Stars

0
  1. Simon_bodill

    100%

    Great stuff very pleased with how it works and coverage

  2. Simon_bodill

    100%

    This stuff is fantastic goes on well coverage great

  3. alfredoariascasado

    100%
    Translated from Spanish - Show original Show translation

    I needed to give a base before painting and remove imperfections.

    I needed to give a base before painting and remove imperfections. Perfect

Customers who bought Spray.bike Smoothing Putty also bought

Recently viewed products