Language: EN
- Secure payments
- Fast delivery with UPS
- 30 days return
- Questions? +44 14 7042 2050
Search
Details Spray.bike Paint Fluorescent Collection
PLEASE NOTE: Colours on our website will vary slightly depending how your monitor is calibrated. We do our very best to make sure all our images are true to the actual product you are purchasing but we can not guarantee a perfect match every time due to almost limitless variations in home monitor set ups.
Shipping limitations: Due to transport restrictions, we are unable to send Spray.Bike products to countries outside the European Union, or to Norway, Switzerland, Malta, or Iceland.
SPRAY.BIKE PAINT: Fluorescent Collection: Blisteringly bright fluorescents for both intense colour and reflective safety use. Because of the reflective pearlescent particles, the fluro colours are slightly grainier than the other ranges. Rubbing down about an hour after painting with a soft cloth is highly recommended.
- 400ml.
- Finish: Matte.
- With a 400ml can you will be able to paint a complete frame.
- Highly pigmented acrylic paint compound.
- Dry-fall powder coating.
- Non-drip, non-dribble formula.
- No primer required.
- Suitable for steel, aluminium and carbon surfaces.
- Permanent and resilient: UV-resistant and weather-resistant.
- Solid colours with deep matte finish and semi-transparent glazes.
- Optional transparent finish: satin, gloss and lacquer.
- Colours and finishes perform together in all combinations.
- Easily-achieved fading, stenciling and blending effects.
- Requires no post-application equipment or treatment.
- ISO 9001 certification
- CFC Free (chlorofluorocarbon-free)
Description
Instructions for use:
- Ensure surface is clean and dry.
- Wear protective gloves, protective clothing, eye/face protection.
- Always paint in an open space in the open air.
- Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%.
- Shake can for at least 3 minutes before use.
- Test spray for 2-3 seconds prior to application.
- Spray surface from a distance of 5-12cm.
- When spraying, keep hand moving at all times.
- Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours).
- At end, turn can upside down and spray for 2 seconds before storing.
- Protect can from sunlight and temperatures exceeding 50°C/122°F.
About Spray.Bike
Spray.Bike is a collaboration between three different companies: Brick Lane Bikes – a major international manufacturer, retailer and wholesaler in the bike industry, based in London. Vicious Cycles Athens – an urban bike workshop in the centre of Athens, Greece. Cosmos Lac – a high-tech paint manufacturer based in Greece.
Spray.Bike was created out of frustration with existing products. if you’re not an experienced pro, metal or car spray paint is so utterly difficult to use on bikes. At VCA, while trying to repair a damaged frame using a standard RAL spray, we were so disappointed with the results that we phoned up the manufacturer, which happened to be Cosmos Lac. “Well what do you want the paint to do?” was the reply. After 2 years of development, Spray.Bike is the answer.
VCA and Cosmos Lac sent samples over to Brick Lane Bikes in London for their highly trusted opinion. From the moment they tried it, they wanted to be part of the excitement too.