Spray.bike Metal Plating - Brass Gold

Instructions for use:

• Ensure surface is clean and dry.
• Wear protective gloves, protective clothing, eye/face protection.
• Always paint in an open space in the open air.
• Optimal temperature for spraying: 20-25°C. Do not use Spray.Bike if the temperature is below 10°C or above 35°C, or if relative humidity is above 75%.
• Shake can for at least 3 minutes before use.
• Test spray for 2-3 seconds prior to application.
• Spray surface from a distance of 5-12cm.
• When spraying, keep hand moving at all times.
• Allow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours).
• At end, turn can upside down and spray for 2 seconds before storing.
• Protect can from sunlight and temperatures exceeding 50°C/122°F.

LINK 1: Spray.Bike, special sprays for painting your bike

LINK 2: Tips and tricks: painting your bike with Spray.Bike

Spray.Bike is a collaboration between three different companies: Brick Lane Bikes – a major international manufacturer, retailer and wholesaler in the bike industry, based in London. Vicious Cycles Athens – an urban bike workshop in the centre of Athens, Greece. Cosmos Lac – a high-tech paint manufacturer based in Greece.

Spray.Bike was created out of frustration with existing products. if you’re not an experienced pro, metal or car spray paint is so utterly difficult to use on bikes. At VCA, while trying to repair a damaged frame using a standard RAL spray, we were so disappointed with the results that we phoned up the manufacturer, which happened to be Cosmos Lac. “Well what do you want the paint to do?” was the reply. After 2 years of development, Spray.Bike is the answer.

VCA and Cosmos Lac sent samples over to Brick Lane Bikes in London for their highly trusted opinion. From the moment they tried it, they wanted to be part of the excitement too.