Montana MTN PRO Wash Primer 400ml

Phosphate Primer (Wash Primer) with excellent adhesion on galvanized and zinc electroplated steel, aluminum, and all type.

Instructions for use:

• Apply to clean, dry surfaces. On rusty metallic surfaces remove rust with a wire brush. Due to the multitude of substrates and methods for application, it is recommended to do a test on the material prior to application.
• Wear protective gloves, protective clothing, eye/face protection.
• Not suitable for cleaning skin and hands.
• Don’t spray on plugged-in equipment and use it only in well-ventilated areas.
• Test spray for 2-3 seconds prior to application.
• Spray surface from a distance of 20cm.
• Apply in thin, even layers to obtain the best results. Second coat may be applied after 20 mins. May be repainted with other products after 2 hours. Check compatibility by testing.
• At end, turn can upside down and spray for 2 seconds before storing.
• Protect can from sunlight and temperatures exceeding 50°C/122°F.

LINK 1: Spray.Bike, special sprays for painting your bike

LINK 2: Tips and tricks: painting your bike with Spray.Bike

Since its foundation in 1994, and in line with the philosophy of its founders, Montana Colors has been committed to ensuring the highest standards for all of its products to protect the environment and the health of graffiti artists.

The ability to innovate, care for a job well done, full devotion to customers and commitment to graffiti and the environment are the core values ​​of a brand that sets it apart.