Montana MTN PRO Varnish 2K Transparent Matt 400ml

Two component (2K) polyurethane varnish that may be used for sealing painted surfaces. It is specially designed for the final finishing coat of parts and repairs. This product has long lasting resistance to moisture and chemical products.

Remember to leave at least two hours for a complete dry between coats to get an optimal result. And now, some tips for you to spray-paint your bike in complete safety and so that the result is the best possible.

Instructions for use:

• Ensure surface is clean and dry.
• Wear protective gloves, protective clothing, eye/face protection.
• Always paint in an open space in the open air.
• Shake can for at least 3 minutes before use.
• Test spray for 2-3 seconds prior to application.
• Spray surface from a distance of 20cm.
• When spraying, keep hand moving at all times.
• Finish matt: is gloss when first applied but quickly dries matte.
• At end, turn can upside down and spray for 2 seconds before storing.
• Protect can from sunlight and temperatures exceeding 50°C/122°F.

LINK 1: Spray.Bike, special sprays for painting your bike

LINK 2: Tips and tricks: painting your bike with Spray.Bike

Since its foundation in 1994, and in line with the philosophy of its founders, Montana Colors has been committed to ensuring the highest standards for all of its products to protect the environment and the health of graffiti artists.

The ability to innovate, care for a job well done, full devotion to customers and commitment to graffiti and the environment are the core values ​​of a brand that sets it apart.