Finna Breeze Classic Bicycle - Pearl White


Product discontinued

Don't worry, we have thousands of products for you!

Details Finna Breeze Classic Bicycle - Pearl White

  • Frame: Finna Full CR-MOLY.
  • Fork: Finna 700C CRMO for CB.
  • Wheelset: Weinmann 700C.
  • Hubs: KT Alloy 32 Holes front hub / Shimano Nexus 3V rear hub.
  • Tyres: Kenda Kwest 700 x 28C.
  • Inner tubes: Kenda Super Lite Tube.
  • Brakes: Promax Chrome.
  • Bottom bracket: FSA Cartridge 48T.
  • Chain: KMC 96L.
  • Shifters: Shimano SL-3S41E.
  • Stem: Kalloy AS-601.
  • Handlebar: HL 25.4 x 560 mm (15º).
  • Headset: Neco 1-1/8" Threadless.
  • Bar tape: Velo Rubber 125 mm.
  • Seatpost: Kalloy 350 x 27.2 mm.
  • Seatpost clamp: Kalloy.
  • Saddle: Cionlli 6205.
  • Bell: Nuvo NH-B405AP.
  • Reflectors: Cat Eye.
  • Mudguards: Sunnywheel U-Stay.
  • Sizes: XXS (537) XS (551) S (569) | M (590).
  • Weight: 12,9 Kgs.
  • Warranty: 2 years.


Inspired by the classic Dutch bicycles, and with steel frame, the Finna Breeze classic bicycle has a very retro and beautiful look. It's a classic-style city bike that fits the style of today's girls, and allows you to tour the city in a much more enjoyable and practical way.

The low bar frame is robust yet manageable, and the Shimano Nexus shifter is ideal for both uphill and flat driving. Mudguards and retro-reflectors are also fitted as standard.


This city bicycle with gears arrives around 80% assembled in a well-protected box. The most complicated is already assembled from the warehouse and the rest is very easily finished. You will have to install the front wheel, saddle and seat post, adjust the handlebars and place the pedals, though we recommend to have everything assembled by a professional.

When you take the bicycle out of the box remove all the protections and the front wheel that is attached to the frame. Then place the seat post and saddle in their corresponding place on the frame. The next part to place is the bicycle handlebars: tighten the stem screws and place the handlebars in the middle. Install the pedals on the cranks as follows: each pedal is marked with the letters L (left) and R (right) to indicate the side to be mounted. Place them slowly and carefully so as not to damage the thread of the crank arms. And finally place the front wheel in the fork dropouts and tighten the nuts.

You should have no problem with the assembly of the bicycle, it is quite straightforward. But if you are not confident in completing the assembly, we recommend that you take the bike to a nearby shop / bicycle mechanic so that a specialist can complete the assembly, and make sure you can ride the bicycle safely and assembled well for a smooth ride.

Other products in Classic Bikes

Customers who bought Finna Breeze Classic Bicycle - Pearl White also bought

Recently viewed products